Matrox C Series - Matrox IPX Updater; Accessing Your Windows Firewall Settings

Matrox Display Wall – User Guide 75
Matrox IPX Updater
The following are the firewall requirements for a system running the network version of the Matrox
IPX Updater.
Accessing your Windows Firewall settings
To access your Windows Firewall settings:
Windows 10/7 –
1 Windows 10 – Click Start Æ Settings Æ Network & Internet Æ Ethernet Æ Windows
Firewall
.
Windows 7 – Click Control Panel Æ Network and Internet * Æ Network and Sharing
Center
*. (* Depending on your configuration, these steps may be unnecessary.)
2 Windows 10 – In the left panel, click Advanced Settings .
Windows 7 – In the left panel, click Windows Firewall Æ Advanced Settings .
Network Port Type Inbound Outbound Functionality
20,21 TCP — 9 FTP: File upload
22
*
* Minimum requirements.
TCP 99SSH: Firmware update
443
*
TCP — 9 HTTPS: Authentication
1900
*
UDP 99
UPnP: Microsoft SSDP for discovery of
UPnP devices
Note: You may need administrator rights to modify your Windows Firewall settings. For
more information, see Windows documentation or contact your system administrator.