102 Appendix F: The Matrox Iris GTR breakout board
Your Matrox Iris GTR breakout board has the following connectors, most of
which are terminal block connectors:
• Matrox camera connector. Connects your Matrox breakout board to your Matrox
Iris GTR, using the Matrox Iris GTR digital I/O and power cable.
• Power source connectors. Connects your Matrox Iris GTR breakout board to a
source of power. The power source connectors includes both a terminal block
connector and a DC power socket. Note that only one power source connector
should be used.
• Input connector. Receives trigger signals and other auxiliary input signals from
connected third-party input-generating devices.
• Output connector. Sends auxiliary output signals to connected third party devices.
• ICS3 connector. Sends an auxiliary output signal to a connected lighting
controller (such as, an Advanced Illumination inline control system (ICS3), a
Smart Vision Lights Brick light, or a similar device).
To Next Page
Loading...
