Comet Executive Gas Preventive Maintenance
4-15
Check Compression Roll Pressure
and Padding Condition
Perform only when the unit is
RUNNING and COOL.
Use Extreme Caution.
Uneven compression roll pressure can shorten
the life of the compression roll pad. Regular
pressure checks and adjustments as necessary
can help extend padding life.
In addition, check the cover’s overall condition
for wear, discoloration or displacement. Consider
cover replacement as necessary.
For more information, refer to Compression
Roll on page 7-16.
4.4 Semi-Annual PM
(1000 Hours)
WARNING
Do not repair or correct any
of these conditions without
reading and understanding
the Repair chapter.
Only qualied personnel
should troubleshoot and
repair this unit.
Make sure the unit is
completely cooled down and
power is turned OFF at the
main disconnect switch.
Follow lockout/tagout
procedures approved for
your site. Follow local
regulations. Failure to do so
could result in serious injury.
To Next Page
Loading...