MBO B21 - Marking of the Product; Working Area

Page10Alterations reserved Version 05/2008
Operating Manual B21-C - en
1.2.1 Marking of the product
The identification of the machine as well as the most important machines data can be seen at the
machine in the type sign (1).
Allways indicate these statements for the sevice orders and spare part orders:
• Fabrication number
• Serial number
• Machine type
1.2.2 Working area
The represented graphics show the single working area of the machine. The permitted work field
during the operation is marked in grey.
1
$
$
$
$
3