Page48Alterations reserved Version 05/2008
Operating Manual B21-C - en
4.0 Maintenance
This part of the Operating Manual is directed to the competent service personnel and internal
authorized personnel.
Danger through maintenance tool.
Negligence can cause heavy personal injuries or extensive damages.
• Use only tools in good working condition.
• Pay attention that after adjustment or maintenance working at the
machine, all tools are removed.
:$51,1*
Danger of running machine parts.
Negligence can cause heavy personal injuries or extensive damages.
• Safety switches at the protection and noise hoods can not be
manipulated or modified.
• Never carry out foldroller settings while machine is still running.
• Even manual foldroller setting by the handwheel.
Danger of running machine parts during the installation work.
Negligence can cause heavy personal injuries or extensive damages.
• Allow service and cleaning works only to be carryed.
• Turn off the machine during maintenance and restoration work by the
main switch.
• Neutralize the electrical cabinet against unintentional switch on.
• Check before turning on, that no further person is at the machine.
'$1*(5
Danger of slitter shafts.
Negligence can cause cut injuries.
• During maintenance work at the slitter shafts, the use of
protection gloves and safteyshoes is required.
• Do not hold the slitter shafts by the tool but always at the
shaft.
:$51,1*
To Next Page
Loading...
