Alterations reserved
Version 05/2008
Operating Manual B21-C - en
Page 39
2.4 Organisational and personnel
2.4.1 Working safety
• Preserve the operationg instructions manual permanently at the machine regarding to the
operating instructions the universally valid local regulations to the accident prevention and to
the environmental protection.
• Keep all safety references and dangers references at the machine in readable conditions.
• Review the safety references and dangers references occasionally.
2.4.2 Demands on the operating personnel
This table represents the jurisdictions and the different activities of person groups, which work at
the machine.
2.4.3 Qualification and training
Ensure that the operating personal was trained with the machine and that the operating manual
was read. A correct operating of the machine can prevent severe injuries to the operator and third
persons as well as material damages.
Attend to following references:
• Permit only trained and on manner personnel work at the machine.
• The user information must be read and understood by the operating and maintenance
personnel.
• Determine clearly the responsibility of the personnel for operating, converting and
maintenance.
• Let only trained personnel work at the machine under supervision of a trained person.
• Instruction must be receipt in written form.
Instructed
Persons
Mechanic firm
Customer service
Responsable
supervisor
Transport and packing
Starting
Operation
Troubleshooting mechanically
Interference removal electrically
Arrange, mobilizing
Maintenance
Restoration
Out of order, storage
To Next Page
Loading...
