Operating Instructions – Labmaster
©
130 and MB20G Systems
Instruction Manual
Chapter 9: System Operation
© MBraun, Inc. Edition 1/2007 Page 9-16
Touch the number field next to the Setpoint
Temperature Freezer to display the alphanumeric
keypad. Use the keypad to adjust the parameters
in the same manner as before.
The default setpoint is -35°C however, the freezer parameters can
be set at any temperature between -10°C and -35°C.
Touch the End button to return to the start screen.
Touch the Functions button to display the
functions screen.
Touch the Freezer button to activate the freezer.
Touch the End button to return to the start screen.
To Next Page
Loading...
