76 Operator's Manual English
5. Press CLOSE to exit the case history list.
6. If you have not already done so, remove the USB drive.
4.15.4. Deleting Case Histories
Note: Exporting case histories, as described in the previous section, does not delete them
from the monitoring system. This section explains how to delete case histories.
To delete one or more case histories from the case history list:
1. Make sure that the monitoring system is powered on and that no sensors are
connected.
2. Press MENU.
3. Press CASE HISTORIES. The case history list appears.
4. Press the checkbox next to one or more cases to be deleted.
5. Press the Delete button.
The message “Delete the selected cases?” appears. Press OK to delete.
6. When complete, the following message appears: “Successfully deleted (n) cases.”
7. Press FINISH.
8. Confirm the cases have been removed from the case history list.
Note: If you delete the most recent case, the append feature (continuing a case) is disabled.
To Next Page
Loading...
