Medtronic INVOS - Page 79

4
Operator's Manual English 75
•
Export the case history, if desired. See Exporting Case Histories, page 75.
7. Press CLOSE to exit the case history view.
8. Press CLOSE to exit the CASE HISTORY list.
4.15.3. Exporting Case Histories
Using a USB flash drive, you can export individual or multiple cases from the case history
list, or you can export the case that you are viewing. After exporting cases, you can upload
them to a computer. See Downloading Case Histories to a USB Drive, page 78 for
information about data format, file names, and working with the data.
Note: Medtronic recommends incorporating appropriate security measures for any external
devices receiving patient data from the monitoring system.
To export one or more case histories from the case history list:
1. Make sure that the monitoring system is powered on but that no sensors are
connected.
2. Press MENU.
3. Press CASE HISTORIES. The case history list appears.
4. Press the checkbox next to one or more cases to export.
5. Insert a USB flash drive into a USB port on the monitor or docking station.
See Figure 4, page 16 and Figure 7, page 19.
6. Press the Export button.
A progress bar appears. Do not remove the USB drive while the export is taking
place.
7. When the export is complete, press FINISH or remove the USB drive.
8. Press CLOSE to exit the case history list.
9. If you have not already done so, remove the USB drive.
To export a case history that you are viewing:
1. Follow the steps in Viewing Case Histories, page 73, but do not close the case
history view.
2. Insert a USB flash drive into a USB port on the monitor or docking station.
See Figure 4, page 16 and Figure 7, page 19.
3. Press the Export button.
A progress bar appears. Do not remove the USB drive while the export is taking
place.
4. When the export is complete, press FINISH or remove the USB drive to return to the
case history list.