M
AVTM246004 BITE 2/2P Rev 4 July 2011
99
GLOSSARY
G
Use only in accordance with this Instruction Manual.
active test The measurements for the cells or battery string to which
the transmitter is currently connected
baseline A value established as a reference for measurement; a
benchmark.
BITE Battery Impedance Test Equipment
cell A receptacle containing electrodes and an electrolyte either
generating electricity by chemical action or for use in
electrolysis.
cell reversal A change in the normal polarity of a cell, typically
occurring during a deep discharge.
deviation The percentage by which the measured impedance of a
cell differs from the average impedance for the entire
battery string.
equivalent circuit An arrangement of circuit elements that has
characteristics, over a range of interest, electrically
equivalent to those of a different circuit or device (used for
convenience of analysis).
float A method of operation for storage batteries in which a
constant voltage is applied to the battery terminals
sufficient to maintain an approximately constant stage of
charge.
Hi_A Screen display for ripple and current measurement
(I > 15 A).
LCD Liquid Crystal Display.
Lo_A Screen display for BITE 2/2P current measurement
(I < 3.0 A).
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
