Megger BITE 2 - Communications Functions

M
AVTM246004 BITE 2/2P Rev 4 July 2011
131
COMMUNICATIONS FUNCTIONS
The remote device and the AVOLINK software must always
operate with the same communications parameters. If you find
it necessary to change the communications parameters for
AVOLINK, you can do so from the Maintenance tab.
Click on Maintenance to display the Maintenance tab, and
select BITE, TTR or DART from the Select Device drop-down
list.
Maintenance Tab
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com