Megger BITE 2 - Transfer Data

M
AVTM246004 BITE 2/2P Rev 4 July 2011
124
Transfer Data
NOTE: Before transferring, you may want to disable your screen saver
(if you are using a screen saver). If you have a screen saver running at
the same time as the transfer, the screen saver may interrupt the
transfer and cause it to abort.
1. To begin the transfer, click the Transfer button. The
Transfer button toggles to Cancel, and the Communication
Status window at the bottom of the AVOLINK window
indicates it is waiting for data.
Transfer Button Pressed
2. Then, from the BITE, start sending the data. Each of the
two following subsections describes how to send the data
from one of the BITE devices.
• Sending data from the EBITE and BITE2 receivers
• Sending data from the MBITE
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com