USING AVOLINK WITH THE BITE
AVTM246004 BITE 2/2P Rev 4 July 2011
125
Sending data from the EBITE and BITE2 Receivers
Since you connected the receiver to the PC before powering up
the receiver, the display on the receiver will show the Transmit
Data screen:
Y TRANSMIT DATA
N (Y/N) MENU
Transmit Data Menu
1. Press
on the receiver to select Y. The receiver prompts
you to select TRANSMITTER or PC.
TRANSMITTER
PC MENU
Select PC
2. Press
on the receiver to select PC. The screen on the
receiver tells you to wait as the test results are
transferred. When the transfer is complete, you are
prompted to clear the data from the BITE.
Refer to the instruction manuals for the EBITE and BITE2 for
information about deleting data after transferring.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
