M
AVTM246004 BITE 2/2P Rev 4 July 2011
67
8
SETTING OPTIONS
Overview
You can change
these default
options to optimize
the BITE 2 and BITE
2P functions for your
use.
This chapter explains how to set options that control the operation of
the BITE2/2P receiver.
The BITE 2/2P receiver is shipped with certain options set, including:
• Turning the backlight on and off so that the receiver screen
does or does not light up when the instrument is powered on
• Adjusting the screen contrast
• Selecting the language in which the receiver displays
information (English, Français, Deutsch, Español, Português)
• Setting the date and time
• Setting the line frequency to 50 or 60Hz
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
