BL1448GE ZP-BL16E TM1700-SERIES
13
2 INTRODUCTION
2.2 User’s Registration
Please, send in the User’s registration form to:
Megger Sweden AB, Box 724,
SE-182 17 DANDERYD, Sweden.
By fax: +46 8 510 195 95.
By e-mail: seinfo@megger.com
Note It is very important that you register the
instrument to get continuous product infor-
mation and access to various improvements
on your actual release.
2.3 Service and Support
For technical assistance please contact your local Meg-
ger representative or direct your request to the office
in Sweden.
Contact Information
Internet: www.megger.com
E-mail: support-sweden@megger.com
Tel: +46 8 510 195 00
Fax: +46 8 510 195 95
Address
Megger Sweden AB
Rinkebyvägen 19
SE-182 36 Danderyd
Sweden
Checklist before calling/e-mailing
for support
▪ Read the manual
▪ Restart the instrument with the On/Off button
▪ Try to repeat the operation if possible
▪ Try minimize the operation by excluding some measured
parameters. Do a timing with no analog measurements.
▪ Check that no fuse has failed
▪ Identify the instrument model, serial number and revision
of software.
To Next Page
Loading...
