86 TM1700-SERIES ZP-BL16E BL1448GE
10 QUICK GUIDE
10
Quick Guide
Select – Connect – Inspect
Working with the instrument means fast and easy
testing. Testing is done with a three-step process.
IMPORTANT
Always follow the safety regulations in
chapter 1 of the instrument User’s Manu-
al.
Always comply with local safety regula-
tions.
Note This Quick Guide instruction assumes that
factory settings are used.
STEP 1: Select
First step is to select a suitable template from the
template library (Templates) depending on number of
contacts per phase, motion or not, resistor contacts
and more
To Next Page
Loading...
Need help?
General
