BL1448GE ZP-BL16E TM1700-SERIES
83
9 DATA ANALYSIS
settings) or right-click anywhere inside the display
(display settings). These changes are temporary and
will not be stored when you close the window.
Pass/Fail
Opens dialogue box used for pass/fail presentation (if
enabled for the actual test), see below.
Compare - menu
The compare function displays two recordings in the
same graph. The arrow indicators in the lower right
corner of the screen are used to scroll between pos-
sible comparisons (if any).
None
No comparison is made
Within Test
Automatic selection of comparable operations within
the same test
Between Tests
Automatic selection of similar operations for different
tests of the same circuit breaker
Free Selection
Free selection of comparisons. CABA Win will give a
warning when operations/parameters do not match.
Window menu
Cascade
Cascade all open windows
Tile
Tiles all open windows on full screen
Report
Report a Recording
This format is used for reporting a single recording
with its parameters in a table format. Report tem-
plates that fits all circuit breakers and test plans are
available.
You can make a report using List&Label or using Mi-
crosoft® Word. For Word you need CABA Win version
R02A or higher.
Report a Test
This format is used for reporting a test with several
operations/recordings. Standard templates for dif-
ferent test plans are available but individual breakers
might need editing of variable names before they
can be reported with a default template. All record-
ings that are to be reported in the template has to be
opened in CABAana, i.e. open, close, open- close and
close-open operations for a template where the differ-
ent operating times should be printed.
To Next Page
Loading...
Need help?
General
