SECTION - 9 PREDELIVERY PREPARATION AND STORAGE
90-899883183 DECEMBER 2007 Page 19 / 24
2. Remove the drain plug from the aft drain plug from the heat exchanger.
a - Aft heat exchanger drain plug
3. Clean out the drain hole with a stiff piece of wire until the entire system is drained.
NOTE: It may be necessary to lift or bend hoses to allow water to drain completely.
4. Remove and lower the hose connecting the water inlet to the power steering cooler, or the
water inlet to the heat exchanger.
a - Power steering cooler
b - Water inlet to heat exchanger hose
To Next Page
Loading...
Need help?
General