DIRECT FUEL INJECTION
90-855347R1 JANUARY 1999 Page 3B-47
COMPRESSOR REMOVAL
1. Disconnect battery cables from battery terminals.
2. Remove top cowling.
IMPORTANT: Prior to removing flywheel cover, remove vent hose from fitting on
flywheel cover.
3. Remove flywheel cover.
4. Use 3/8 inch (9.5 mm) drive on belt tensioner arm to relieve belt tension. Remove belt.
b
a
56142
a
b
a-Belt Tensioner
b-3/8 in. (9.5 mm) drive
CAUTION
If engine has been recently run, air pressure outlet hose fittings may be extremely
hot. Allow components to cool off before beginning disassembly.
5. Disconnect air pressure outlet hose.
To Next Page
Loading...
