EasyManua.ls Logo

MERLO PANORAMIC - Page 159

MERLO PANORAMIC
200 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 - ATTACHMENTS AND OPTIONAL EXTRA
8 - 8
WARNING!
Always check to ensure that the
forks are correctly secured on the
carriage so as to prevent any
lateral sliding and possible
escape.
Fitting this attachment demands a
reduction in the useful loads in the
diagram equal to the weight of the
FEM carriage.
• FORK EXTENSION
The standard fork is inserted into the
extension and secured by means of
pin "1" behind the heel of the fork (2).
Each fork extension bears a plate with
the following details:
A = Maximum applicable load at 1000
mm (1200 mm for P60.10 - P72.10)
from the heel of the forks
B = Progressive manufacturing number of each month
C = Month of manufacture (starting from January of each year with the letter "A")
D = Last figure of the year of manufacture
E = Permitted fork dimensions (width, thickness, minimum length)
(P37.12 PLUS - P38.12 PLUS - P38.13 PLUS - P38.14 PLUS - P40.9 PLUS P40.17 PLUS P38.12 P38.13 P38.14
P40.17 – P38.13EE – P40.17EE)
• Weight: 50 kg; • Rated load capacity: 1125 kg; • Centre of gravity of the load ("P") from the fork heel: 1000 mm
(P60.10 - P72.10 – P60.10EE – P72.10EE)
• Weight: 60 kg; • Rated load capacity: 1500 kg; • Centre of gravity of the load ("P") from the fork heel: 1200 mm
Always check to ensure that the pin has been correctly fitted to prevent the risk of the tools accidentally becoming unhitched.
Check that the load has been correctly applied.
• DIGGING BUCKET
Assemble the attachment on the carriage as described in the paragraph
INSTALLATION OF QUICK-COUPLING ATTACHMENTS in this chapter and use
it with the auxiliary controls in the cab as described in the paragraph CONTROL
OF HYDRAULICALLY FUNCTIONING ATTACHMENTS.
(P37.12 PLUS - P38.12 PLUS - P38.13 PLUS - P38.14 PLUS - P40.9 PLUS
P40.17 PLUS – P38.12 – P38.13 – P38.14 – P40.17 – P38.13EE – P40.17EE)
- Weight: (A706) = 420 kg : (A701) = 400 kg
- Max capacity: (A706) = 1000 l : (A701) = 900 l
• (P60.10 - P72.10 – P60.10EE – P72.10EE)
- Weight: (A704) = 525 kg : (A707) = 420 kg
- Max capacity: (A704) = 1200 l : (A707) = 1000 l
TRANSPORT: Circulation on public roads with the bucket connected is only allowed if the appropriate protection, included with
the attachment, is applied.

Table of Contents