MERLO PANORAMIC - Page 80

4 - COMMANDS AND INSTRUMENTS
4 - 25
The BULK LOADER / REHANDLING BUCKET / DIGGING BUCKET attachment, installed on
the machine, was correctly identified by the system.
The CARRIAGE-MOUNTED WINCH attachment installed on the machine was correctly
identified by the system.
The PUSHING BLADE attachment installed on the machine was correctly identified by the
system.
Attachments whose centre of load gravity is 1.5 metres from the machine carriage (position “B” of selector switch 204)
The WHEEL JOYSTICK attachment installed on the machine was correctly identified by the
system.
The MIXING BUCKET attachment installed on the machine was correctly identified by the
system.
The ROUND-BALE HANDLER attachment installed on the machine was correctly identified by
the system.
The FRONT CLAMPS attachment installed on the machine was correctly identified by the
system.
The LOWERED LIFTING BOOM / TELESCOPIC LIFTING BOOM attachment, installed on the
machine, was correctly identified by the system.
The FLY JIB / FLY JIB WITH WINCH attachment, installed on the machine, was correctly
identified by the system.
Attachments whose centre of load gravity is 4 metres from the machine carriage (position “C” of selector 204)
The MINI TOWER JIB attachment installed on the machine was correctly identified by the
system.
The TUNNEL RIB HANDLER attachment installed on the machine was correctly identified by
the system.
Attachments that cannot be used with the dynamic load control system in the event of malfunctioning, faults or absence of
the self-recognition sensor.
The SLEWING HOIST attachment installed on the machine was correctly identified by the
system.
The COUNTER-CARRIAGE MOUNTED HOIST attachment installed on the machine was
correctly identified by the system.
The FIXED PLATFORM / TRILATERAL PLATFORM / TRILATERAL EXTENSIBLE PLATFORM
attachment, installed on the machine, was correctly identified by the system.
The PANEL HANDLING PLATFORM attachment installed on the machine was correctly
identified by the system.
The SPACE 11 attachment installed on the machine was correctly identified by the system.