Metronics Quadra-Chek 200 - Page 47

Quadra-Chek
®
QC200
2-21
Step 2
Press the tol soft key.
Step 3
Press the positional tolerance (pos) soft key to perform a positional tolerance.
Step 4
Press the true position (TP) soft key.
Step 5
Use the numeric keypad to enter the nominal values for X and Y.
NOTENOTE
NOTENOTE
NOTE
Until the user enters nominal values, the QC200 displays theUntil the user enters nominal values, the QC200 displays the
Until the user enters nominal values, the QC200 displays theUntil the user enters nominal values, the QC200 displays the
Until the user enters nominal values, the QC200 displays the
actual coordinates in the nominal X and Y fields.actual coordinates in the nominal X and Y fields.
actual coordinates in the nominal X and Y fields.actual coordinates in the nominal X and Y fields.
actual coordinates in the nominal X and Y fields.