– v –
Structure of this Operation Manual
Chapter 1 Set-up
This chapter describes the configuration of the accessories and main unit of the device,
the procedures to be taken to set up the device and the procedures to be taken to con-
nect the cables.
Chapter 2 Basic operation and settings
This chapter describes steps of procedures to be followed from turning on the power to
the device through cutting (plotting) and settings to be established according to the
basic operating procedures.
Chapter 3 Explanation of functions
This chapter gives explanation of functions of the device and corresponding methods
to operate them.
Chapter 4 In case of trouble
This chapter describes how to correct troubles in the even that abnormal conditions are
encountered.
Appendix
This appendix describes the replacement of blades, output samples and specifications
of the main unit of the device.
To Next Page
Loading...
