MIMAKI JV5-160S - Page 194

5 In Case of Trouble
5-24
∗∗∗∗ ERROR 212 ∗∗∗∗
WASTE INKtank SENSOR
An error occurred in the control sys-
tem.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 250 ∗∗∗∗
Y COORDINATES
An error was detected during scanning
operation.
Turn off the power to the printer and
turn it on after a while. If the same
error message appears again, contact
your local distributor to call for ser-
vice.
∗∗∗∗ ERROR 251 ∗∗∗∗
SYSTEM ERROR
A system error occurred.
Error message Cause Remedy