MIMAKI JV5-160S - Page 57

2-23
About Function Menus
4Press the [] or [] key to set ON/OFF of automatic cleaning.
5Press the [FUNCTION] key again if the setting of [CLEANING INTERVAL] and [CLEAN-
ING TYPE] is needed.
This setting is permitted only when automatic cleaning [ON] is selected.
6Press the [FUNCTION] key to go to the lower level of hierarchy and press the [] or
[] key to input [CLEANING INTERVAL].
Press the [] or [] key to display the setting screen for [CLEANING TYPE] and press the [] or [] key to
set a cleaning type.
7Press the [ENTER] key twice to finalize the setting.
Press the [END] key several times to return to LOCAL mode.