Mindray A9 Operating Instructions

Cleaning and Disinfection Maintenance
9 - 12 Operator’s Manual of Anesthesia System
Figure 9-2 Remove the breathing tubes
9.7.3.1.2 Manual Bag
NOTE: Do not reuse, reprocess, or sterilize disposable products.
Directly draw out the manual bag to disassemble it.
Figure 9-3 Remove the manual bag
9.7.3.1.3 O
2
Sensor
1. Press the O
2
sensor cover switch to open the O
2
sensor cover.
Figure 9-4 Open the O
2
sensor cover
2. Pull straight out the O
2
sensor cable from the O
2
sensor support.
Breathing tubes
Breathing tubes
Manual bag
Oxygen sensor cover switch

Mindray A9 Specifications

General

Type	Anesthesia Workstation
Integrated Gas Analysis	Yes
Backup Battery	Yes
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 55°C
Battery Type	Lithium-ion
Ventilation Modes	Volume Control, Pressure Control, SIMV, Manual Ventilation
Display	Touchscreen
Patient Monitoring	ECG, SpO2, NIBP, EtCO2, Temperature
Connectivity	Ethernet, USB
Portability	Mobile (with wheels)
Battery Life	Minimum 90 minutes (typical)
Altitude	Up to 3000 meters
Power Supply	100-240 VAC, 50/60 Hz
Charging Time	Approximately 4 hours
Storage	Internal storage for patient data and system logs
Supported Languages	Multiple languages
Certifications	CE, FDA