Mindray A9 Operating Instructions

Environmental Specifications Product Specifications
10 - 6 Operator’s Manual of Anesthesia System
10.4 Environmental Specifications
10.5 Electrical Specifications
10.5.1 Main Electrical Power Specifications
The anesthesia system complies with ANSI/AAMI ES60601-1 for its main power supply.
Operating Temperature: +10°C to +40°C
+50°F to 104°F
Storage Temperature: -20°C to +60°C (Oxygen Cell: -20°C to 50°C)
-4°F to 140°F (Oxygen Cell: -4°F to 122°F )
Operating Humidity: 15 to 95% RH, non-condensing
Storage Humidity: 10 to 95% RH, non-condensing
Operating Atmospheric Pressure: 70 kPa to 106.7 kPa (10 psi to 15.5 psi)
Storage Atmospheric Pressure: 50 kPa to 106.7 kPa (7.3 psi to 15.5 psi)
TABLE 10-4 Environmental Specifications
Power Supply Input Voltage: 100 to 120 VAC @ 50/60 Hz
Power Supply Input Current: 10 A maximum (5 A maximum for anesthesia system, 5A
maximum for auxiliary outlets)
Length of Power Cord: 5 m
Grade of Power Cord: Hospital grade
TABLE 10-5 Main Electrical Power Specifications

Mindray A9 Specifications

General

Type	Anesthesia Workstation
Integrated Gas Analysis	Yes
Backup Battery	Yes
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 55°C
Battery Type	Lithium-ion
Ventilation Modes	Volume Control, Pressure Control, SIMV, Manual Ventilation
Display	Touchscreen
Patient Monitoring	ECG, SpO2, NIBP, EtCO2, Temperature
Connectivity	Ethernet, USB
Portability	Mobile (with wheels)
Battery Life	Minimum 90 minutes (typical)
Altitude	Up to 3000 meters
Power Supply	100-240 VAC, 50/60 Hz
Charging Time	Approximately 4 hours
Storage	Internal storage for patient data and system logs
Supported Languages	Multiple languages
Certifications	CE, FDA