Mindray A9 Operating Instructions

Operator’s Manual of Anesthesia System 3 - 9
Installation and Disassembly Anesthetic Gas Scavenging System (AGSS)
• When both the patient monitor and ACGO circuit need to scavenge the gas to the AGSS, use the
adapter as shown below.
Figure 3-8 Active AGSS (connecting to the patient monitor and ACGO circuit)
3.7.2 Passive AGSS
• When the ACGO circuit needs to scavenge the gas to the AGSS, use the adapter as shown below.
Figure 3-9 Passive AGSS (connecting to the ACGO circuit)
Connecting to the patient
monitor via sampling tube
Connecting to the ACGO circuit
Connecting to the ACGO circuit
Connecting to the hospital's
waste gas scavenging system

Mindray A9 Specifications

General

Type	Anesthesia Workstation
Integrated Gas Analysis	Yes
Backup Battery	Yes
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 55°C
Battery Type	Lithium-ion
Ventilation Modes	Volume Control, Pressure Control, SIMV, Manual Ventilation
Display	Touchscreen
Patient Monitoring	ECG, SpO2, NIBP, EtCO2, Temperature
Connectivity	Ethernet, USB
Portability	Mobile (with wheels)
Battery Life	Minimum 90 minutes (typical)
Altitude	Up to 3000 meters
Power Supply	100-240 VAC, 50/60 Hz
Charging Time	Approximately 4 hours
Storage	Internal storage for patient data and system logs
Supported Languages	Multiple languages
Certifications	CE, FDA