Mindray A9 Operating Instructions

Ventilation Linkage Parameters Parameters and Factory Defaults B - 12 Operator’s Manual of Anesthesia System
SIMV-PC Pinsp PLAT
or 80% of
PEAK or
the closest
approxima-
tion
#* PLAT
or PEAK or
the closest
approxi-
mation
—# # #
RR *** *—#*#
Tinsp #*# #—#*#
ΔPsupp #*# #—**#
F-Trig/P-Trig #*# #—**#
PEEP *** *—**#
Exp% #*# #—**#
Trig Window #*# #—#*#
Tslope #** *—***
CPAP/PS Min RR ### ##—##
ΔPsupp #*# #*—*#
F-Trig/P-Trig #*# #*—*#
PEEP *** **—*#
Exp% #*# #*—*#
Apnea I:E or
Apnea Ti
### ##—##
ΔPapnea ### ##—##
Tslope #** **—**
CURRENT VENTILATION
MODE & AFFECTED
PARAMETERS
PREVIOUS VENTILATION MODE
VCV SIMV-VC PCV PCV-VG SIMV-PC CPAP/PS SIMV-VG APRV
* In the event that the previous ventilation mode and the current one share some parameter values, the parameter setting remains unchanged.
# For the parameters that are not shared by the previous ventilation mode and the current one, the most recent settings of the parameters apply.

Mindray A9 Specifications

General

Type	Anesthesia Workstation
Integrated Gas Analysis	Yes
Backup Battery	Yes
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 55°C
Battery Type	Lithium-ion
Ventilation Modes	Volume Control, Pressure Control, SIMV, Manual Ventilation
Display	Touchscreen
Patient Monitoring	ECG, SpO2, NIBP, EtCO2, Temperature
Connectivity	Ethernet, USB
Portability	Mobile (with wheels)
Battery Life	Minimum 90 minutes (typical)
Altitude	Up to 3000 meters
Power Supply	100-240 VAC, 50/60 Hz
Charging Time	Approximately 4 hours
Storage	Internal storage for patient data and system logs
Supported Languages	Multiple languages
Certifications	CE, FDA