Equipment Views Product Description
2 - 8 Operator’s Manual of Anesthesia System
B6 Negative pressure source port Used to connect to the wall-mounted negative pressure
source of the hospital.
B7 Waste Gas Scavenging outlet Used to connect to the waste gas disposal system.
NOTE: Please use a waste gas disposal
system that complies with the
ISO 80601-2-13 standard.
B8 Overfill protection The overfill protection of the negative pressure suction
device, used to prevent backflow of effluent after the bottle
is full to ensure pipeline and tube safety.
B9 Network interfaces (CS1, CS2) Used to connect to other equipment with network cables.
B10 SB interfaces (SB1, SB2,
SB3, SB4)
Used to connect to a USB device.
CAUTION: Do not connect any devices to
the SB ports other than
Mindray approved USB
storage devices and a
supported USB mouse.
B11 Equipotentiality Used to provide a grounding point. Used to eliminate the
electric potential difference between the ground wires of
different devices to ensure safety.
B12 Communication interface (SP1) RS232 communication interface.
B13 Power input socket Used to connect to the power cord.
B14 Video signal port Used to connect to an external display.
B15 Cylinders Supply tanks containing high pressure O2, Air, and N2O to
act as backup supply if the pipeline pressure is removed.
PARTS DESCRIPTION
To Next Page
Loading...
Need help?
General
