Image Optimization 5-55
a
b
When 3D image or the MPR the direction of which is the same as 3D image is active, a
control point is displayed on the 3D image, roll the trackball to move the control point.
Section Image Viewing
The principle of 3D imaging is to render a 3D image from multiple 2D image information.
You can move the MPR line to view the different position of the section image.
Sectional plane position
In the quad display format view, there are 3 sectional planes (A, B and C) and the 3D
image.
To Next Page
Loading...
