10-18 Patient Data Management
(2) Select the user name in the drop-down list of User Name.
(3) Enter password and click [Login].
For emergency users, click [Emergency] directly to log on.
To change user:
(1) To log out the current user and change to another user, click at the lower
right corner of the screen to pop up the following dialogue box:
(2) Click [Change User] to pop up the Login dialogue box.
(3) Enter the user name and password in the field box.
10.9.4 Add/ Delete a User
The system administrator can add and delete a user, while the operator can’t.
Add a User
Premise: you must log on the system as the system administrator. If not, you will be
required to enter administrator name and password before the setting.
1. Open the “Admin” page through the path: [Setup]→[System Preset]→[Admin]. See
the figure below.
To Next Page
Loading...
Need help?
General
