Mindray M6 - DICOM Local Setting

DICOM 11-3
Name Description
DHCP
/ Static
If “DHCP” is selected, IP address will be automatically obtained from DNS
server; if “Static” is selected (using static IP address), you need to enter the
IP address.
IP
Address
IP address of the system.
Subnet
Mask
Used to set different network segment.
Gateway Used to set the gateway IP.
OK Click to confirm parameter setting.
Cancel Click to cancel parameter preset.
Tips: The IP address of the system should not be occupied by other devices in the
network, or the DICOM function will fail.
11.1.2 DICOM Local Setting
To set the DICOM server properties and log saving manner.
1. Press <Setup> to enter the Setup menu.
2. Move the cursor onto [Network Preset], select [DICOM Local] to open the screen, as
shown in the figure below:
3. DICOM Local Setting items are described as follows: