Probes and Biopsy 12-9
The above is a dimension illustration of the 6CV1s probe.
You can select the probe sheath according to the actual application situation.
12.1.5 Probes Cleaning and Disinfection
After completing each examination, clean and disinfect (or sterilize) the probes as
required. When biopsy procedures have been performed, be sure to sterilize the
needle-guided bracket. Fail to do so may result in the probe and the needle-guided
bracket to becoming sources of infection. Please follow the instructions in the manual for
cleaning.
WARNING:
Never immerse the probe connector into liquid such as water
or disinfectant. Immersion may cause electrical shock or
malfunction.
CAUTION:
1.
When performing cleaning and
disinfection of the probe to prevent
infection, wear sterile gloves.
2.
After disinfection, rinse the probe thoroughly with sterile
water to remove all chemical residues. Chemical residues
on the probe may be harmful to the human body.
3
No cleaning and disinfecting may result in the probe
becoming a source of infection.
NOTE: 1.
After the examination, wipe off the ultrasound gel thoroughly. Otherwise,
the ultrasound gel may solidify and degrade the image quality of the
transducer.
To Next Page
Loading...
Need help?
General
