3-4 System Preparation
3.3.2 Powering OFF the System
You need to follow the correct procedures to power off the system. In addition, after you
upgrade the software or when the system is down, you need to power off and restart it.
If you will not use the system for a long period of time, you shall:
1. Disconnect the power adapter.
2. Disconnect the mains power.
3. Turn off powers of all peripherals connected to the system.
To power off your system normally:
Gently press the power button once on the upper right corner of the control panel. The
[Shutdown Confirm] screen appears.
Shut down: To power off the system normally.
Standby Click to enter the standby status.
Cancel: to cancel the operation.
To shut down the system in a direct way if you cannot do it normally:
Press and hold the power button for a long time and the system will power off without
displaying the [Shutdown Confirm] screen. However, shutting down the system this way
may destroy the data.
NOTE:
1.
DO NOT rush shutdown of the system in a direct way. It may destroy the
data.
2.
After the software upgrade, please shut down the system in the normal way
(using “Shut down” method) so as to guarantee a fully update.
To Next Page
Loading...
Need help?
General
