Mindray M6 User Manual

DICOM 11-13
Name Description
Verify
Click to verify if the two DICOM application entities are normally
connected.
Exit Click to exit the screen.
11.1.4.5 Storage Commitment Setting
1. Enter the “Storage Commitment” page: “[Setup] → [Network Preset] → [DICOM
Service]→Storage Commitment.
 Select device, enter the information. For device setting, please refer to “11.1.3
DICOM Server Setting”.
 Click [Add] to add the service to the Service list.
 Select an item in the service list, change the parameters in the above area, and
click [Update] to update the item in the service list.
 Select an item in the service list, and click [Delete] to delete the service.
 Select an item in the service list, and click [Default] to set the server to be the
default service.
2. Select an item in the service list, and click [Verify] to verify the connection.
3. Click [Exit] to confirm the setting and exit the page.

Mindray M6 Specifications

General

Type	Portable Ultrasound System
Applications	Abdominal, Cardiac, Vascular, Small Parts, Musculoskeletal
Operating System	Windows-based
Ports	Ethernet, USB
Supported Probes	Convex, Linear, Phased Array
Imaging Modes	B-mode, M-mode, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler