14-16 Setup
b) Click [Copy] to enter the “Body Mark Preset - Add Picto” screen, thus you can
edit the copied body mark.
Add new body mark
a) Click [New] to enter the “Body Mark Preset - Add Picto” screen; here you can
draw a body mark to your preference.
Available tools are described as follows:
b) Check on the screen, move the cursor onto the probe mark and
press <Set>, adjust the position with the trackball and direction with the
multifunctional knob.
c) After the drawing of a body mark is completed, click [OK] to save it and exit
the user-defined body mark status.
Edit/ delete a user-defined body mark
After selecting a user-defined body mark, click the [Edit] button to edit it.
Delete
After selecting a user-defined body mark, click [Delete] to delete the selected image.
Load:
Click [Load] to load user-defined body mark from external media.
Left/right flip Up/down flip
Brush Eraser
Drag
To Next Page
Loading...
Need help?
General
