Image Optimization 5-77
Other related Operations
Zooming/panning adjustment
Same as these in 3D/4D mode.
Measurement, comments, and body mark
Same as these in other modes.
Hiding the reference
Tap to hide or show the reference line.
Hiding the measurement
Tap to hide or show the measurement.
Switching between the single and quad-split display
Press <Dual> or the user-defined <Quad> key between the single and quad-split display.
5.11.16 Smart FLC (Smart Follicles Calculation)
CAUTION:
Smart FLC result is provided for reference only, not for confirming a diagnosis.
NOTE: Smart FLC is an optional function, and it is not available in Smart 3D mode.
5.11.16.1 Basic Procedures for Smart FLC
1. Acquire necessary 3D/4D data and freeze.
2. Tap [Smart FLC] tab on the touch screen to enter Smart FLC, and the system is in the “Edit ROI”
status ([Edit ROI] button is highlighted in green);
3. Set the position and size of the ROI box.
4. Tap [Calc] on the touch screen.
5. Auto calculation is finished:
Section image (A, B, C) is enclosed with colored lines and the color corresponds to the follicle
in VR window.
3D image (VR);
Results on the right of the screen are displayed in a table.
V: Volume
d1, d2, d3: diameters of the follicle
MD: Follicle Diam
To Next Page
Loading...
Need help?
General
