B-4 iWorks (Auto Workflow Protocol)
Select type from the drop-down list as Sequence, Random, or Insert Protocol.
Tap or click [Save] to temporarily save the creating.
4. Tap or click [Generate Protocol] to generate a user-defined iWorks protocol.
B.8 iWorks Settings
Enter the iWorks preset screen using the path: “[Setup] → [iWorks].” Here you can customize the
protocols and views:
B.8.1 Protocol Management
Click [Multi Select] and you can select multiple views to be copied in the list on the left.
Click to select the protocol in the list. The protocol type can be checked on the right. Check to select
applied exam modes in the “Applied to” column.
Click [Add Protocol] to create a new protocol. It can be customized.
Click to select a protocol in the list on the left and click [Copy]. A protocol named “xxx_Copy1” is created
with the copied views, which can be customized.
Select a view with “Left”, “Lt”, “Right” or “Rt” in its name in the list on the left, and click [Copy L<>R]. The
selected view is copied onto a new view in which bodymarks, annotations and measurement items are
reversed to the opposite side.
Click [Delete] to delete a user-defined protocol.
Click [Up] or [Down] to move the selected protocol.
Click [Move to Top]/[Move to Bottom] to move the selected protocol to the top or bottom of the list.
B.8.2 View Management
Click to select the views in the list. The image, annotation, body mark and measurement settings can be
checked on the right.
Click to select a user-defined protocol in the list. Click [Add View] to add a view template to the protocol.
To Next Page
Loading...
Need help?
General
