Mitel 470 - Page 176

Configuration
176
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
Administrator authorization level:
The Administrator has access to all the views and functions of the configuration tool
(Expert mode). He can call up a set-up assistant, show a general configuration assis-
tant and a special hospitality configuration assistant, and configure all system parame-
ters. The administrator can switch back and forth between Expert mode and Standard
mode at any time.
Authorization level Administrator (Standard mode only):
In Standard mode the administrator has access to all the main views and functions of
the configuration tool. He can call up a set-up assistant, show a general configuration
assistant and configure the most needed system parameters.
System assistant authorization level:
The System Assistant only sees selected views of the configuration tool, and the scope
of functions is limited.
Hospitality-Administrator authorization level:
The Hospitality Administrator features all the views required to set up the Mitel 400
Hospitality Manager and the reception menu of the MiVoice 5380 / 5380 IP and specify
its default settings. A link can also be used to start the Mitel 400 Hospitality Manager
(see "Mitel 400 Hospitality Manager", page 177
).
Receptionist authorization level:
This access starts the Mitel 400 Hospitality Manager directly (see "Mitel 400 Hospitality
Manager", page 177).
The WebAdmin is included in the file system of each communication server of the
MiVoice Office 400 family and does not have to be installed separately.
Access:
To access the registration page of WebAdmin, enter the communication server IP ad-
dress in your browser. You can find the registration data of a new communication
server in the chapter "Default user account for initial access", page 182
.
If you do not know the communication server IP address, search for the communica-
tion server on the IP network with the auxiliary application System Search (see
page 179
).
Note:
With the web-based administration two users are able to access the same communication
server simultaneously (and no fewer than five users at the Receptionist authorization level).
This can cause confusion if a configuration is being carried out in the same places.