Configuration
190
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
Thereafter you must acquire a licence. The licence overview (Tab. 34) shows which
trial licences are available.
All licences are contained in a licence code, which you can obtain from your authorised
dealer. Each licence code can only be used for one communication server. To licence
several communication servers, you will obtain separate licence codes to match the li-
cence information of the individual communication server. If a communication system
consists of several communication servers (e.g. in a AIN), normally only one licence
code is required on the Master.
A new communication system must be activated first after commissioning. Otherwise,
the communication server changes after 4 operating hours to limited operating mode.
Enter the licence code in the Licences ( =q9) view.
If you have received a voucher (or with the help of the Equipment ID), you can also ob-
tain the licence code via Mitel Connect https://connect.mitel.com (partner login re-
quired). You can find instructions about this in WebAdmin help.
See also:
"Licences", page 70
5. 6. 2 File management
You can gain access to the communication server’s file system in WebAdmin.
• Localization ( =e6)
You can adapt the communication system to your country's specifications, with the
help of localization. In this view language files can be manually or automatically
loaded for Mitel 6700 SIP / 6800 SIP SIP phones via FTP server. Moreover, you can
manually or automatically load the languages for the WebAdmin, Hospitality Man-
ager and Self Service Portal user interface and online help, as well as an external
numbering plan for the SIP connection via the FTP server.
• File system state ( =e3)
In this view you can see the thematically structured file system's memory load. In an
AIN the file systems for all nodes can be viewed.
• File browser ( =2s)
With the file browser you have access to the communication server file system and
create new folders as well as view, import, replace or delete files in the file system.
Note:
File management is only accessible for Administrators in Expert mode.
See also:
You can find detailed information about the functions in WebAdmin help for the corresponding
view.
To Next Page
Loading...
