EasyManua.ls Logo

Mitel 470 - Event Types

Mitel 470
272 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation and Maintenance
223
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
6. 6. 1. 1 Event types
Event messages have a certain severity level: Normal (blue), Serious (yellow) and Crit-
ical (red). Many event messages have both a negative impact (error occurred) and a
positive impact (error corrected). Some event messages have no impact and, thus, no
match. Severity level and impact are indicated in the event table.
If an SRM server is indicated as signal destination, the event message severity level
results in a change of system status. This can be seen in the SRM agent and is dis-
played with the corresponding colour (see also section "SRM destination", page 244
).
Tab. 99 Event types, in alphabetical order
Event message Trigger condition Details
1)
Severity
ATAS: Connection estab-
lished
ATAS: connection (re) established date, time critical
(positive,
with
match)
ATAS: Connection lost ATAS: connection lost Cause (0: Logoff, 1:
missing cycle signal),
date, time
critical
(negative,
with
match)
BluStar Client back within the
licence limit
A sufficient number of licences is now available
again for BluStar clients.
Parameter 1: 0 (not used)
Licence type: 0 and 1: (not used), 2: BluStar CTI,
3: BluStar Softphone, 4: BluStar video option,
5: BluStar Presence option
Parameter 1, licence
type, total purchased
licences, date, time
Serious
(positive,
with
match)
Card in service A card that was previously out of service is back
in service again.
Number of the
expansion slot, date,
time
critical
(positive,
with
match)
Card out of service A card previously in operation has stopped func-
tioning.
Number of the
expansion slot, date,
time
critical
(negative,
with
match)
Card reset A reset was carried out for one card Number of the
expansion slot, date,
time
Normal
(without
match)
Charge counter overflow Individual cumulative counter or cost centre
counter overflow
Cause (0: User /
1: Cost centre /
2: Exchange line /
3: Room), number,
date, time
Serious
(without
match)
CL printer available again Printout on the system printer available once
again
Date, time
Serious
(positive,
with
match)

Table of Contents

Related product manuals