Operation and Maintenance
239
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
6. 6. 1. 2 Event tables
Event tables ( =f4) list all the event messages the system is capable of generating
(see Tab.
).
There are 7 event tables. After a first start, all event tables are assigned at least one
destination. This assignment can be modified in the Message destinations (( =h1))
view. Each event table can be configured individually. This means it is possible with a
filter to decide which event message – if any – should be sent to a particular signal
destination either immediately, with a delay or not at all.
• No event:
This type of incoming event messages are never sent to the linked destination.
05 Continuous negative answer from
SMTP server
Transmission of e-mail
recipient address
Call logging for
hospitality
06 Temporary negative answer from
SMTP server
Prepare data transmis-
sion
Configuration
files
XX: User ID
YY: Terminal ID
07 No answer from SMTP server Data transmission in
progress
08 E-mail attachment not found End data transmission
09 Invalid host, domain or IP address on
the communication server
Prepare authentication
(LOGIN)
10 E-mail text too long (body) User name authentica-
tion (LOGIN)
11 E-mail attachment too large Password authentica-
tion (LOGIN)
12 Format of e-mail attachment not sup-
ported
Authentication (PLAIN)
13 No e-mail recipient address Prepare encrypted
authentication (CRAM-
MD5)
14 Invalid e-mail recipient address Encrypted authentica-
tion (CRAM-MD5)
15 Invalid e-mail sender address Preparing to send next
e-mail
1) Action carried out by the SMTP client at the point when the error occurred.
Parameter 1 (XXYY) Parameter 2: Parameter 3:
Value Reason (XX) Action (YY)
1)
E-mail client
Additional info
depending on the
e-mail client
(XXYY)
To Next Page
Loading...
