EasyManua.ls Logo

Mitel 470 - Restricted Operating Mode

Mitel 470
272 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Expansion Stages and System Capacity
79
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
Note:
If you use the Mitel Open Interfaces Platform, OIP takes the licences from the communica-
tion server. So always acquire these licences for the communication server so you can use
ATAS even without OIP.
BSS Licence
This licence allows a BluStar server to be connected.
BSS-Lync Interface
This licence allows the use of the BluStar Lync interface.
CSTA Sessions
This licence allows third-party applications to monitor/check a terminal on the com-
munication server using the CSTA protocol. If a terminal is monitored or checked by
several applications or instances, one licence is required for each monitoring/check.
Presence Sync. via SIMPLE and MSRP
SIMPLE (Session Initiation Protocol for Instant Messaging and Presence Leverag-
ing Extensions) is a protocol for exchanging presence information, and is used be-
tween SIP endpoints (terminals, network interfaces and nodes). MSRP (Message
Session Relay Protocol) is a protocol used for exchanging data between SIP clients
(e.g. for chats). This combined licence defines the number of users who can use
one or both protocols for third-party applications. Only one licence is needed for a
user with several SIP phones.
SMPP
This licence allows the use of the SMPP protocol. The licence cannot be purchased
individually but is part of the Advanced Messaging licence.
3. 4. 7 Restricted operating mode
Without a valid Software Release licence the communication server switches over to a
restricted operating mode four hours after each restart. The restriction concerns the fol-
lowing aspects:
Restricted operating features:
No call information for incoming calls and during the call connection.
Dialling by name is deactivated.
Functions cannot be invoked via the menu or function key (likewise no enquiry calls
can be made).
The team keys do not work.
Functions codes are not carried out (except remote maintenance on/off).
Dialling from PC and other CTI functions are not supported.

Table of Contents

Related product manuals