Expansion Stages and System Capacity
70
Mitel 470 as of R4.1
syd-0585/1.2 – R4.1 – 08.2016
(active) SWA is available for the communication server, via the SWA state in the
WebAdmin title bar.
The SWA state is retrieved via an encrypted direct link on the licence server. If there is
no connection to the licence server, the last known state is displayed
The number of users covered via SWA and the number of configured users can be
seen in the System information ( =1v) view. SWA becomes invalid if the number of
configured users exceeds the number of users covered via SWA . Each entry in the
User category counts as configured user in the numbering plan ( =g4).
3. 4. 6 Licences
Use of the call manager software requires a licence. Additional licences are required in
order to use a number of enhanced functions and protocols, to enable voice channels
or to operate certain terminals. The Mitel CPQ application automatically plans the nec-
essary licences, which are then enabled on the communication server using a licence
code.
The licence code (LIC) contains all the enabled licences. When you purchase a new li-
cence from your authorised dealer, you obtain a new licence code in return. Enter this
in WebAdmin and store it in the communication server in the Licences ( =q9) view.
Notes:
– A licence code is not transferable to another communication server.
– If you receive a voucher instead of a licence code, log on with your partner login at
Mitel Connect https://connect.mitel.comand generate the licence code yourself using the
EID number. Detailed instructions about this can be found in the WebAdmin help on the
Licences ( =q9) view.
3. 4. 6. 1 Description of available licences
Software
• Software Release
Updating to a new software release requires a licence. A valid software assurance
(SWA) entitles you to upgrade the communication server to a new software level for
a specific period., and to operate it with a specific number of users.
A valid software assurance is the prerequisite for being able to acquire an update li-
cence (Software Release licence) for a particular software version. Without a valid
Software Release licence you can update the communication server to a new soft-
ware level, but after four hours of operating time it will switch over to the restricted
operating mode (see "Restricted operating mode", page 79
). The communication
server will switch back to normal operation as soon as you enter a licence code that
To Next Page
Loading...
