Mitel 5212 - Account Code

36 Using the phone system
Final
2 Enter the account number using the phone keypad. The LCD displays the
account code entered:
3 Press the CALL softkey to start your call. The next available line
appearance is selected, dial tone is heard and your phone LCD updates.
4 Proceed with making your call.
To enter an account code during a call, follow these steps:
1 Select the Account Code key. The LCD displays:
2 Enter the account number using the phone keypad. You hear a tone as
you press the phone keys, but the person on the other end does not. The
LCD displays the account code entered:
3 Press the ENTER softkey when you have finished entering the account
code.
You can re-enter an account code for a call multiple times. The last
account code entered is the account code that will be assigned to the call.
If you enter an account code with an invalid length, the phone LCD briefly
displays "Invalid Account Code". Contact your system administrator to
determine the valid account code length for your business.
You cannot assign an account code to a call once it has been completed.
Account code speed entry
Account code entry is accepted before a call is placed or during a call. To use
this feature, it must be enabled for your business, and you must have a
memory key programmed with Account Code and a pre-programmed
account code.
To enter a pre-programmed account code before you place a call, follow these
steps:
1 Select the Account Code key. The LCD briefly displays the account code
that has been pre-programmed:
The next available line appearance is selected, dial tone is heard and
your phone LCD updates.
Account Code:
CALL QUIT
Account Code: 1234
CALL QUIT
Account Code:
ENTER QUIT
Account Code:1234
ENTER QUIT
Account Code: 45678