88 Using the phone system
Final
Mute on Telematrix 3000
Using Mute, you can silence any sound from the phone. This does not prevent
incoming sound from being heard. Press the Mute key during a call to activate
Mute. The LED on the key indicates when Mute is active.
One touch speed dial on the Telematrix 3000
Using One Touch Speed Dial, you can make a call to a pre-programmed
number. To use this feature, a programmable key must be programmed as a
One Touch Speed Dial. See “Program memory keys” on page 101.
To use One Touch Speed Dial, choose one of the following:
• Lift the handset and press the One Touch Speed Dial key.
• Press an available Line Appearance key, to activate the speakerphone,
and then press the One Touch Speed Dial key.
• Press the One Touch Speed Dial key. This will select an available Line
Appearance and activate the speakerphone.
Page on the Telematrix 3000
Using Page, you can send a page to all of the phones at your site. The page is
broadcast through the speaker of each available phone. To use this feature,
you must have a memory key programmed as a Page key. See “Program
memory keys” on page 101.
To page all of the phones at your site, follow these steps:
1 Select a memory key programmed with the Page feature.
When the system is ready for you to begin your page, you will hear an
alert tone.
2 Speak into the handset or the speakerphone.
3 To end the page, you have the following options:
• Replace the handset if using the handset.
• Select the Speaker key if using the speakerphone.
A page will not be broadcast on phones that are busy.
If you select Page while there is already a page in progress, the system
will wait until the page in progress is completed before your page is
started. You will hear ringing while you are waiting.
Speaker on the Telematrix 3000
Using Speaker, you can turn the speakerphone on your phone on and off. To
use Speaker, press the Speaker key
To Next Page
Loading...
