80 Using the phone system
Final
You can also start dialing the number without lifting the handset. This will
automatically select the next available Line Appearance and operate in
speakerphone mode.
2 To make an internal call, dial the extension. To make an external call, dial
the prefix required for external dialing (usually 9) followed by the number
you want to call.
When you finish dialing the number, the call is placed.
3 To end the call, replace the handset.
To use the speakerphone for step 1, press an available Line
Appearance key or the Speaker key instead of lifting the handset.
To end the call before you have completed dialing, choose one of the
following:
Replace the handset if using the handset.
Select the Speaker key if using the speakerphone.
Making a second call on the Telematrix 3000
To make a second call while on an active call, follow these steps:
1 Press any available Line Appearance key. This puts the active call on
hold, and provides dial tone for a second call.
2 To make an internal call, dial the extension. To make an external call, dial
the prefix required for external dialing (usually 9) followed by the number
you want to call.
When you finish dialing the number the call is placed.
3 To switch between two active calls, press the flashing Line Appearance
key. This puts the active call on hold, and activates the other call.
4 Ending one call keeps the second call on hold. To reconnect to the
second call, press the flashing Line Appearance key.
Using features via the Telematrix 3000
This section explains the features available from your phone. Some of these
features must be pre-programmed in order to be available. To learn how to
program features to keys, see “Program memory keys” on page 101.
3-way call on the Telematrix 3000
Using 3-Way Call, you can set up a phone call among three separate phones.
To activate 3-Way Call, follow these steps:
To Next Page
Loading...
