Mitel 5212 - Using the Mitel 5212 IP Phone

54 Using the phone system
Final
1 From another phone, make a call to you extension.
2 While your phone is ringing, repeatedly press the Volume Control keys
on a 5020/5220 IP phone or on a 5224 IP phone press the key until
the ring volume is at the level you want.
Changing handset volume
To change the volume of the sound you hear through the handset, follow
these steps:
1 Lift the handset. You will hear dialtone.
2 Repeatedly press the Volume Control keys on a 5020/5220 IP phone or
on a 5224 IP phone press the key until the volume is at the level you
want.
3 Replace the handset.
Changing speaker volume
To change the volume of the sound you hear through the speaker, follow
these steps:
1 Press the Speaker key on a 5020/5220 IP phone or the key on
a 5224 IP phone. You will hear dialtone.
2 Repeatedly press the Volume Control keys on a 5020/5220 IP phone or
on a 5224 IP phone press the keys until the volume is at the level
you want.
Using the
Mitel 5212
IP Phone
This section describes the setup, activation, and use of the Mitel 5212 IP
phone.
The Mitel 5212 IP phone has the following features:
• Handsfree speaker phone (half duplex)
• 2-line, 20-character backlit LCD display
• 12 multi-function memory keys with color LEDs
• 6 fixed function keys, including Directory, Cancel, Redial, Hold, Transfer/
Conference, and Message
• Mute and Speaker keys
• Dedicated headset jack
• Wall mountable