Mitel 5212 - Answering a Call on the 5212 IP Phone

56 Using the phone system
Final
5 Wait for the phone to display the following (this may take 30 seconds or
more):
6 Enter *00. The phone will display the following:
7 Enter your extension. The phone will display the following:
8 Enter your PIN, then the # key. The phone will display the following:
You have now successfully activated the phone, and can make calls.
Answering a call on the 5212 IP phone
When an incoming call is received on a phone, several things happen: (1) the
phone rings, (2) a Line Appearance flashes, and (3) the LCD displays the
phone number of the caller and, if know, the name of the caller.
You can answer an incoming call by using the handset or the speakerphone.
You can pull back a call that has been answered by a twinned target phone by
pressing the corresponding Line Appearance key. See “Twinned calls” on
page 75.
Using the 5212 handset
To answer your phone using the handset, follow these steps:
1 Lift the handset.
• Alternatively, you may choose to use one of the following methods:
- Press the flashing Line Appearance key.
- Press the key on the 5212 IP phone.
You have now answered the call. The LCD displays the caller's name (if
known).
LOGGED OUT
*00 to Login
Extension:
PIN:
Enter pin press #
Extension: 314
321: Robin Jones